ERDrPC

Any ideas? I wrote a similar program under a different event to test and it works as expected. I disabled some of the code in the screen shot below but with nothing disabled - all TVs turned on and showed the IP camera. I'm stumped

I have a doorbird announcement that triggers an audio and video snapshot. It was working prior to 2.10.6 to 3.2.3. Now only the Family room jump to IP camera works. I tried to setup conditional programing such that if the Office TV, Gym TV, and/or Rec room TV were on then show the IP camera on those as well. I have my NVR plugged into a JAP transmitter. I've tried using the if statement TV ON or Room ON but neither seems to trigger the programming. You can ignore the camera jump to the touchpanels - that works fine. I'm using my IP camera feed to the TVs instead of the camera jump for better resolution. FYI when the Doorbird Video time expires - it recalls the video snapshot. Only the family room displays the camera feed. None of the other rooms including masterbed (which doesn't have an IF conditional) don't change source if on or turn on to display the IP camera feed

Anyone with the Chowmain Hikvision NVR driver know the NVR keypress command to return to 4x4 multi-camera view. I used to use a camera jump for door bell press as I have EA1 behind all key TVs but not happy with the resolution. I plugged the 4k HDMI output of my NVR into my JAP system. I know how to program the NVR video output to the correct camera but I don't know how to make it go back to the full screen 4x4 view after my video "jump" is complete Also - any idea why none of my IP cameras show up as an attachment for a push notification. Only my doorbird camera snapshot is selectable.

Thanks. I have to plan it out. Did you use a holding tank or straight hook up to a water line? Is the valve just for on/off? Which pump did you use? It seems the misting nozzles do the actual work

I had a 800 replace a 700 and unfortunately the bug struck again. All my banks were knocked out. My installer got it warranty replaced.

Haven't done it yet. On my to-do list

Any hardware/install details? We are going to renovate our backyard and want to do exactly what you did Thanks

agree - native geofencing

Can the August keypad be used solely as a keypad to trigger other programing?

Any wattbox with ovrc?

@Liam from Wales When you say load balancing...do you mean balancing across APs - which is turned off; or band balancing and trying to force as many 2.4GHz clients onto 5GHz? Set for force to 5Ghz after 1% of 2.4 Ghz occupied Since I made the BW changes last night - 2 of my 20 clients are now on AC. "set your signal strength to auto on both bands, set 2.4 to Background Scanning, set 5 GHz to ChannelFly, and things will stabilize over time." - done already I don't want 2.4Ghz at full blast. I'm happy to turn down the Tx - just need some direction I am the only client with Ruckus that my installer has. It was my insistence; along with the cisco gear and router with SFP+. They haven't done any network fine tuning. GEar bought from official supplier in Canada. Network design 1Gig up/down modem - Mikrotik router --- SFP+ port 1 into cisco SG350 switch (Top of rack) --- SFP+ into Cisco SG500 48port POE Switch for Just add power --- SFP+ port 2 into cisco S500 48 port POE switch for 3 APs, 11 IP cameras, all else that doesn't need 10Gbase-T from SG350 Samsung s20 plus - expect AC RSSi - 66dBm; SNR 39 dBm; MCS14/20 / 117.0M bps

If I create a legacy 802.11b network - will it still communicate with main network. The device is tied into C4. Still need it to communicate.

I cannot get any devices to connect at 802.11ac

I found the blackwire tips sheet...thanks. Followed everything but the Wi-Fi calling. I have three r710 as unleashed. One on the second floor; one in the basement and a third outside about 50 meters away from the house. For some reason all my 5ghz connections are doing so at 802.11n and not 802.11ac eventhough I have multiple ac devices. Two Samsung s20 plus as an example. I'm also not getting a lot of load balancing between 2.4 and 5ghz. 2.4 is also connecting at 802.11n. I have one legacy 802.11b device - Hunter hydrawise. I can see in each AP WLAN that 802.a/n/ac are available for 5ghz. Under services -> radio control I have automatically adjust AP power to optimize coverage selected; automatically adjust 5ghz channels using channelfly; I don't have automatically adjust 2.4 as it is only set for 1,6,11 and each AP gets one of the channels. Background scanning set to 300 seconds. Client load balancing on only for 2.4ghz at 70db adjacent radio threshold. Not turned on for 5Ghz. Band balancing percent of clients on 2.4GHz is 1% and adaptive band balancing turned on. Radar avoidance pre-scanning turned on. Can anyone think of where/what I'm screwing up? @Kevin L - would love your input as you guys seem to be ruckus experts

Forgot the c4 link https://www.residentialsystems.com/technology/automation/orro-announces-control4-integration-and-pulse-remote-management-system

I just stumbled upon Orro. This thing looks awesome and has c4 connectivity. https://getorro.com/integrators It is swipeable. I wonder if this is the solution for a TS in an area where there is only Single gang room. I would like to know if double tap/press&hold possible What do you guys/girls think??

Service resides in Europe I believe. Not out copyright laws. Lifetime subscription

https://fast.wistia.net/embed/iframe/vs94o1zo7y?videoFoam=true Lots of cool stuff coming

I just wanted to make sure the box I was thinking of would be IP controllable and quick launch. I reached out to the company and they did a test for me and the app that Alan's driver requires works well.

My wife and I haven't used the wake up agent in C4. We both get up at different times especially with me being shift worker. I wonder if this new Android routine can be tied into c4? https://9to5google.com/2021/08/31/google-assistant-routine-alarm-trigger/ I would rather have my wake up agent fire when I dismiss my phone alarm as it means I'm getting up. Anyone else have any cool ways to make something like this work? Another idea is c4 programing based on Waze. If there is an accident on my route to the hospital that requires me to leave early or wake up early, I would love for c4 to let me know or fire the wake up agent early to get me up. As an aside I'd also like Waze to trigger my phone alarm earlier but that's an android thing. I guess I'm waiting for the day where we all live in Tony Stark automated homes.

I was hoping that someone has installed something similar. Trying to avoid $400 usd on a dud box

Anyone use a device such as the monsterbox to stream IPTV? Basically an android tv box. I want to use Alan's android tv driver for IP control. Monsterbox x1 max

I have a JAP video distribution system. Is there a way to get the doorbird video feed direct to tv instead of using camera jump/ea1 and lower resolution video. Ie display the IP feed directly? I have an extra jap transmitter. I'm already planning on using the ip camera feed for a second camera view on certain TVs front my Hik.NVR

Thinking of switch to this service Epico 4k It is based on an android box and requires a Google account. Anyone have a driver for IP control? Will the universal chowmain android TV driver or any other driver work?

I'm on 2.10.9. I don't think intercom anywhere is fixed for my version. I have it on my phone and it's setup but never get an alert. The doorbird app rings however but that doesn't help me