South Africa C4 user

You can also do a lot with the much maligned media scenes where the activate command will deal with digital media or other media with one line of code...

Your logic looks good to me. You could use “else” and get rid of some of the ”stops”. You could also get rid of the volume commands by setting default volumes for the various rooms. However, none of that changes the fact that your logic looks fine to me... There is no limit to the number of “ifs” that you can have AFAIK. I have certainly used a lot more than you have here with no issue. I wonder if your En-suite is staying on without you knowing it? You could test this by dropping the first 4 lines of code and seeing if it then works consistently.

I have started using the Annex4 driver for the TVs in my beach house and I must say it is an awesome driver. What I really like is the Toast messages. My kids hate them though as I keep interrupting their viewing

If I recall correctly there are 3 or 4 voices under each language. The only useful languages for us English speakers are British, American and Australian... That will probably give you 10 or 11 language choices. I found one of the British ladies to be the best (Emma or Amy - again, from memory).

You are correct. At roughly the same time as they updated the V1-V3 driver (which was just a name change - as far as I know - to distinguish it from the 4K driver), they released a new driver for the AppleTV 4K and an Apple Bridge Driver. Both of these new drivers are needed if you want to use the new driver and get the official Apple Driver working (for the 4K unit). The instructions for how the dealer should set these up are contained in the documentation tab of the Apple Bridge driver. I was the first person my dealer set up on the new driver and it took about 15 minutes (the instructions were fairly clear).

Probably not worth it right now... it gets you a few press and hold commands but that is about it. However, looking forward it is probably worth it for 2 reasons: 1. This is the certified driver so is less likely to break at some stage. 2. I assume (guess) that the Apple Bridge is going to do a lot more in the future and give us a lot more Apple control (my guess being that mini apps and Apple Music are not far away).

If it is on IR, you are definitely not on the new driver.

Correct, problem has also disappeared on my side with the new Apple Certified C4 Driver...

I don’t think this sounds likely given all the hassle they have gone to over the last few years (continuing Flash development in parallel for certain features being just one example) to allow other new features to work on the HC controller as well as the EAs. I am sure there wil be some technical reason for the HCs not supporting this. Remember this is a 2 way street... the older Apple TVs (versions 1 - 3) are not supported by this driver in the same way as older controllers (HC series) are not supported. I am sure that there is a good tech reason for both of these. It may (or may not) be one and the same reason.

Or at least... not yet...

Chatted to my dealer today and we are now up and running on the new driver... I’m not seeing any noticeable difference but I am assuming that this bridge is going to open up a world of opportunities in time (Apple Music and mini Apps being the 2 I am after)...

I must say, the new camera experience is infinitely faster! Well done C4!

Often worth swapping to black (backlight anyway) at night in bedrooms but leaving it normal during the day

Move to Apple More seriously, I’m also on the latest C4 OS and push notifications are working perfectly but all my devices are iOS not Android

On version 209, I had select stations until I did a reboot and then it disappeared...

Can you share the driver?

Not fair! That means you have a monitorIng system of some sort and are contributing to Weather Underground or you are paying a lot of money... no disrespect, but I am assuming the former!

Let us know how it goes!

OK, so we had a massive rain storm last night and in the early hours of the morning but “rain today” and “rain in the last hour” both remained at 0mm throughout. I’m not sure if this is a bug in the driver or if the weather station that my area is linked to does not measure rainfall or what the story is... Does anyone else see these variables working (returning non-zero values)? As a matter of interest, does anyone know what weather service is being used?

This! And from what I hear, Dan will do a good job helping you. Good luck @nimsoc

The item I am most interested in is precipitation today... mine has it but we have had no rain for the last couple of days, so I cannot tell if it works. It shows zero which is obviously right, hopefully that changes when there is rain. I can live with it measuring a few blocks away as long as it is roughly right!

Yip. Version 209 popped up for me.

Yes, it can be programmed to arm the DSC alarm system at a given time. Programming is done in Composer (HE or Pro) once the driver is installed and set up. Installation and setup is done in Composer Pro (dealer software).

Ok, so my dealer has the top secret Beta driver (maybe I’m not supposed to have seen it? Shh!). But the good (great) news is that the driver is (appears to be) an update on the current Weather Underground driver (version 207 is what I saw compared to version 104 which is what I have) and the only difference that I could see is that NO API key was needed. I can only assume that C4 is paying for the API key which is really cool!

Definitely out of the box... but I’m going to try this for fun!