Zuhair
c4Forums Member-
Posts
287 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Events
Everything posted by Zuhair
-
Any luck? Sent from my iPad using Tapatalk
-
Did you found any UK/European dealers? I’m also looking for square switches/keypads. Sent from my iPad using Tapatalk
-
Driver Request - IP light driver for Shelly devices
Zuhair replied to xc420's question in Driver Requests
I'm using these two drivers for every light, it shows under light and track the current status. https://berto.io/src/Berto_RelayLight/README.md https://berto.io/src/Berto_ShellyRelay/README.md -
If I use C4-DM201-Z Puck Dimmer, will it work with any switch? Or only C4 switches?
-
Navigation Agent is not jumping to a camera
Zuhair replied to Zuhair's topic in Programming with Composer
Many thanks, I fixed it! Here is what I did: I deleted the Navigation agent and rebooted all controllers (not only the master EA-5). I re-wrote the whole program and converted it to macros, a macro per TV. This way, it's running smoother and faster. -
Hi @time2jet, how much is the C4-SAPD240-N? How many do you have?
-
Navigation Agent is not jumping to a camera
Zuhair replied to Zuhair's topic in Programming with Composer
I did this step in the earlier troubleshooting -
Navigation Agent is not jumping to a camera
Zuhair replied to Zuhair's topic in Programming with Composer
Ad advised, I rewrote the script for the living room and removed the snapshot sections. So the test script is: send C4 command to living room delay 10 second jump to the camera Result is the same, it goes to C4 menu but not the camera. I ran the same script for the kitchen TV and it’s working fine. I did few more steps to rule out all possibilities: I asked my dealer to reinstall the NVR driver Rebooted and checked the Hikvision NVR Rebooted all camera I can view all cameras from OSD I can also view all the cameras in ComposerHE -
Navigation Agent is not jumping to a camera
Zuhair replied to Zuhair's topic in Programming with Composer
I tried the following with no luck. The script is running fine till the end, but not switching to the camera. What is driving my crazy is the TV is switching to the camera manually from the OSD menu. Note: this was running fine earlier. -
Navigation Agent is not jumping to a camera
Zuhair replied to Zuhair's topic in Programming with Composer
@Dunamivora Below is my code, my problem is one of the TVs is not switching to the camera. When the doorbell is pressed: Kitchen TV switch to the camera. Living Room TV turns on and stays at the OSD main page. (when manually select the camera from the OSD it will work). -
Navigation Agent is not jumping to a camera
Zuhair replied to Zuhair's topic in Programming with Composer
@msgreenf If I don’t send Control4 command to the TV, it won’t wake up if the TV was off. Forgot to mention that both TVs can manually display the camera from the OSD. The screenshot below is how Control4 recommend using this agent. I will add the Snapshot after making sure both TVs can display the camera. -
I have EA-5 as the master controller and two EA-1s in the kitchen and living room. I wrote the below script to turn ON the kitchen and living rooms TVs and display the main gate Hikvision camera to both TVs. It's working successfully with the kitchen TV, on the living room TV it just display C4 main menu without switching to the camera. Troubleshooting we did with no luck: Removed the Navigation Agent, rebooted EA-5, reinstalled the agent again. Re-write the script as shown in the next screenshot. Rebooted all controllers. Rebooted the camera and the NVR.
-
Chowmain - Lithe Audio Wifi Speaker driver (FREE)
Zuhair replied to alanchow's topic in Third Party Software
@alanchow Does this mean I can add an additional zone by passing the audio matrix and the amp? Will the driver allow me to bind these speakers to the room audio?- 12 replies
-
- driver
- driverworks
-
(and 3 more)
Tagged with:
-
Remote Programming Services Offered
Zuhair replied to chopedogg88's topic in Looking For An Integrator?
+1- 84 replies
-
- remote
- programming
-
(and 1 more)
Tagged with:
-
Personally, I like the dealer model and I knew it before buying C4. Composer HE is more than enough for me, I can do almost any programming. I don't want to mess with hardware installation/bindings.
-
This response is expected from a salesman post sales! C4 decided to purchase a door station design from a 3rd party that is not engineered for C4 and not putting in mind how will current users replace thier current DS fixed into stone/marble/concrete. In this case, options are: (1) not to upgrade to OS3 (2) upgrade to OS3 and inccur extra cost to replace the box (3) purchase a 3rd party SIP intercom.
-
In addition, the engineer who designed the DS2 did not put in his concediration customers who had thier old DS back box in concrete or marble? Atleast make the DS2 fits into the old box!
-
Many thanks, we scream for help because we trust this forum and the people running it.
-
Registration process needs to be tightened.
-
Maybe questionable facts?!
-
What Media Player is everyone using?
Zuhair replied to manutdsoc2020's topic in General Control4 Discussion
I use Roku + Plex, running smooth with solid integration. Sent from my iPhone using Tapatalk -
Berto Cloud driver causes EA navigator issues
Zuhair replied to lukas.polivka's topic in Troubleshooting, Workarounds, & Bugs
I can confirm that after updating to version 8 and rebooting all controllers & T3s, all cameras are working flawlessly on OSD, T3, and IOS app. Sent from my iPhone using Tapatalk -
Tasmota and Mosquito your best combination. Running flawlessly with Berto driver. Sent from my iPhone using Tapatalk
-
How can I delete my attachment? I'm using 75% of my quota.
-
annex ⁴ - Black Friday/Cyber Monday 2017 - 35% OFF
Zuhair replied to annex⁴'s topic in General Control4 Discussion
That's correct, sorry if I didn't put my question clearly. Does the Annex driver support video with the touch screens such as T3? I'm currently using Doorbird Cinegration driver that that SIP calls the touch screens for the announcement with video, however, it's not stable.