SpencerT

Get off channel 3. Pick 1, 6 or 11. You will want to perform a site survey to determine which one to use. If you have no b devices, select 11ng. I'd move guard interval to long 800. Pick a set power level. I know you're single AP, but Netgear will actually fluctuate transmit power depending on throughput (I believe you're 2x2 which won't take much to force a change).

Are you on 20mhz channel width for your 2.4 radio? Your AP defaults to 40 which buys you nothing but problems on 2.4. Turn off auto channel selection if you haven't already done so. Turn off any "block on excessive retransmits" etc. If you make those changes, bounce the 2.4 radio and bounce the neeo or force a reconnect.

Yeah, this is that mirror situation I couldn't get working. I'm wondering if you have to setup the mirror (i.e. mirror digital out 1 to analog out 1), then select the analog output 1 as your path (even though your connection is through coax on the digital output). I might play with it again.

Are your private subnets the same between both locations?

What mode are you using now?

Try taking parallels out of shared mode and put it into bridged mode.

Digital inputs to analog output, no problem. Digital inputs to digital output, no problem. Analog inputs to analog outputs no problem. Analog inputs to digital outputs is a little finicky, in my experience. According to the manual, Analog to Digital is done by creating a mirror on the digital output of the corresponding analog output (i.e. coax out 1 mirrors analog out 1). I played with this when we first put the matrix in c4 because I was running digital amps but didn't have any luck getting it to work (2 channel audio). Opened a ticket with pulseeight but gave up on it before I heard back. Pulseeight support is excellent, btw, I just put a work-around in. My issue was supposedly a firmware bug on this specific matrix with the c4 driver version (I'm on a pre pulseeight Zektor proaudio AUD1600 that takes different firmware and c4 driver version). They sent me both, I upgraded, fixed a few other issues but never tested the conversion to digital again. If I remember correctly, besides the mirror, the corresponding analog and digital outputs need to be "joined" together as a single zone (this was mentioned on my support call). Here is the snippet from the manual..

You could keep the existing switches and use a Shelly 1L behind them. https://www.shelly.cloud/en/products/shop/shelly-1l Chowmain makes a Shelly driver to bring them into c4.

Dipswitch #18 (which I use regularly) orders the eye mask with Bluetooth headset from Amazon. Or tell her to lock the door when she comes home. It won't re-kick the motor. Just saying.

If it's a dipswitch keypad lock, to mute.. dipswitch #3 to off (down) If yours doesn't have dipswitches, then it's keypad presses (only works with the deadbolt unlocked)... Master code Lock button 1 5 Lock button To toggle between mute and sound. I have 4 older kwikset keypad locks on interior spaces, this is what works between those 4 locks.

Please delete

Disable audio sensing.

Android allows you to set alarms that will trigger Spotify. Possibly a Spotify connect session from someone's phone?

Endpoint and volume would be your receiver.

If you're trying to feed a zone out from your matrix into your receiver, you need to set your matrix zone output to fixed and the receiver to variable (control volume with the receiver).

It's the universal garage door one.

I'll throw this out as a decent "budget friendly" option for 4k multiview.. https://jtechdigital.com/product/2x2-4k-video-wall-controller-seamless-matrix-multiviewer/ We run 5 of these in office common areas (mix of the 2x2 video wall and single display multiview setups). I can't speak for how well the c4 driver works as we utilize a different control system. Jtech is based out of Houston and have always been quick to respond to any questions or issues we have.

Or can you rename the Spotify connect instance? Or delete and re-add under a different name? There are settings in the Spotify app that allow remote reconnect and autoplay.

Silly question, but doesn't the access agent allow you to passcode protect rooms?

Qobuz as well, which is a great alternative to Tidal.

Lol, It's because I did not fully understand and dumped all of this under the pico button. Fwiw, this worked great with 2 sessions playing. It was seemingly random with sessions playing across all of these rooms. I also see what you meant about starting the variables from highest to lowest. I got that fixed, but re-reading your first post I see that I should have the pico button send a +1 and put the programming under the variable which will make this much cleaner (and it will actually work like I want it to). I'll redo it and post it up.

I'm starting to play with that, dealer added it to a few rooms for me to play around with. Weird thing is digital media / join session works for everything. Detect session doesn't work through digital media (unless it's a c4 stream).

Hate to be the DB that quotes myself. Just trying to document this. What I found... Programming against the digital media / if in a session variables - only works for streams coming off the controller (at least in my environment). However, if I detect the session some other way (like room / power state).. I can use the digital media / add rooms to session action. I'm sure I didn't discover water on mars, just thought it was super weird behavior and wanted to document it in this post. Actually found a post from 2017 specifying that not all A/V devices are considered digital media. Based on my testing, I would surmise that not all sessions are considered 'digital media / sessions' from a conditionals standpoint. But - all digital media sessions can be joined with the command regardless of "how" they were started. ????????

Well... Almost. So this seems to work well as long as I'm streaming music directly from the controller. Easily jumps between sessions with each button press. But.. If I have sessions playing with other music (for anything other than pandora we use a NAD CI-580 Bluesound player for 4 more streams). Everything is plumbed into my matrix, sessions in the app shows TV audio, streaming sources off of the bluesound, just the same as pandora or qobuz on the controller. Is it a correct assumption that the digital media / session variables only apply to devices in a session with audio streaming directly from the controller? Not ALL of the actual sessions running?

@South Africa C4 user - Thank you so much. Was able to get this to work with variables. Cycles through each active session with each click. Exactly what I was looking for. Took me a while to get it to work. Thank you!