c4toys

DHCP reservation? sounds like bridge ip has changed.

disable the skill and re-enable it in the Alexa app. You will need your C4 login info

doesnt peloton cast like android device? googlecast or roku > c4 matrix

if you are using the same driver in both rooms then its emitter placement. cover the emitter with your hand, press previous button, If it works more reliably that is going to be the issue.

I once was looking into something similiar. Sonance makes an AB auto switching relay. probably something like the Elan VTHO modules back in the day

Edid issues with the HDMI. not the installer fault, its a HDMI thing. change the resolution on the appletv down to 1080p as temp fix.

I can turn 1 light on and it goes to the right color, turn same light off and back on, it goes white or different color all together! Irritated to say the least

The new lighting proxy obviously has new options. (I had to remove Daylight agent, my project needs a controller upgrade!) I dont understand most of them. I used to control RGB via RGB light driver and a variable that states the color. I changed my programming to ALS and it sucks imo! Now sometimes they come on the correct color and most times 1 or 2 light are the wrong color. Has to be with the new "On" commands ie daylight brightness, default on.. Im beyond irritated messing with this. I have even tried the Chowmain Light group driver with same results. I see an option On color- previous but this is always greyed out? Im asking here before a revert to my old way of controlling these lights ( most are Hue or generic Hue controllers, 1 is Lifx (which is why the chowmain driver is interesting))

Yep, 6-8 that just keep getting repurposed to other locations

I have some v1 lighting issues since last update. ie. this morning a load was on and should have been off. re-activating that scene turned it off, like your macros do. what dimmers seem to be the problematic ones?

I have a similiar setup. it will work but Im thinking your router is set to a static WAN IP since you had a frontier gateway installed. What is your lan IP that come from the Araknis. I bet its xxx.xxx.0.1 ip pool

hmmm Im sure this is going to turn out great! I wouldnt touch this mess

lock drivers have different conditional per drivers. Your light programmimg could be on the command lock/unlock which I believe (with my locks) is trigger when c4 send the command. Option 2 is manual lock which does not trigger the same programming and i think there is a 3rd option like lock proxy. It could be a simple duplication of programming to solve your problem. I have 1 customer with August and I havent messed around with that driver much (cindev) This driver mentions "Activate routines or scenes based on lock events ". https://drivercentral.io/platforms/control4-drivers/security-systems/august-smart-lock/

Like new, we installed and customer purchase smart fans so had to remove $130 each plus shipping

NIB Went a different direction and not needed $350 plus shipping

put a multimeter on the N C and make sure its opening and closing

#1. Is this a driver? Do you arm the system with "snapshot" so when the system is disarmed, it restores everything (lights, blinds, music etc) just as it was at the time of arming? snapshot does not have to used with an alarm. you can take and recall a snapshot at anytime. #2. What shower trim do you have that allows it to be turned on/off remotely or with Alexa? U by Moen #3. This is great. I currently use push/email/sms notification, but the house glowing red would encourage the wife/kids to close the garage. I use just the kp LED's, the house changes color based on house mode/time #4. Are you talking about geotracking a person within their own house (e.g. so music follows you from room to room)? I wish we could geotrack by room. just home and away via lutron light switch in the office. #5. key pad up/down tracking? What do you mean here? I run timers when/if light or music is turned on and have the kp up/down based on what is on and when it was turned on. walk into a room and light turns on you expect the up/down to control the lights not audio or vise vs

1- snapshot, If I run to the store (short trip) the house restores to the last state when returning home. 2- start shower with alexa and c4 turns on lights and music. 3- red led on all light controls when front or garage door is open 4- geotracking! oh wait cant do that ( so dumb) 10 different ways not natively supported 5- kp up/down tracking that actually works logically 6- music following room to room, multi-room music muting when video is turned on

fanimation wifi fan sync works with bond and wifi for alexa integration. you can make alexa turn on the fan/ trip variable in c4 to automate further.

So I would like to adjust tv settings while watching a different source. here is what I did made a variable to track room current source ( If rooms source is not the rooms Tv, set variable =rooms current source) custom button to toggle to tv as room source else to toggle back to previous source (if the current source is rooms Tv> set current room source t= variable rooms current source) one button ( so Im not taking up 2 or more buttons on Neeo or Halo) switch to tv, do what you want in the settings and same button to toggle back to previous source

design tab, select device and look at the summary tab or Tools > detective suite

looks like a plunger was installed. was a wire attached to the sensor? Is that a wire way back in the hole?

what happens if you invert the doorbell sensor? It would add open/closed programming and test further

I do something similiar with Hue strips. I use a 250ms ramp to 10%. The delay I see is more so the motion detecting vs the light turning on.

devices are made to ignore repeat commands thats why we have ir repeat count options in the ir drivers.