Dueport

Yes, the fan controller buttons are fully programmable - unlike the KC120277 the layout just can't be changed.
For the record:
KC = configurable keypad. Doesn't control a load itself
KD = is a keypad and dimmer in one, so controls a load as a dimmer (and yes not what you want here at all)
KA = something else entirely in that it's a special device to act as a multi-way switch for cheap (think top and bottom of stairs), no programming involved (or possible) and looks like a C4 regular switch or dimmer but no leds.

"Mitch fixed it"?  haha, well i didn't fix it, I just clicked upgrade!  Happy to help anyone else upgrade to 3.4.2

@msgreenf fixed it for me with bindings - thank you!
As an aside: I recently purchased Text Expander and I think I'm going to add the phrase "Mitch fixed it" to Text Expander given how often that happens 😎

I would not recommend using anything other than Control4 keypads, or a Control4 touchscreen.  The Control4 keypads are modern looking if you go with the Contemporary button style...I install them in many client homes that are worth 10+ Million and they are perfectly happy with them.

Hello!
I've just released v20 of this driver, it adds support for OS 3.4.2 and also adds a property to increase/decrease the volume of Google Speech announcements
There's also a sale on the driver price for the next couple of weeks

Fixed

Apr 10, 12:18 EDT
Investigating - We have identified an issue with customer.control4.com, mydot.control4.com, composer pro and controller registration.. We are aware of and actively investigating solutions and impact. More details to follow. Thanks, Your Snap One Engineering team
View the full article

Probably not you.
Post in the dealer forum about slow loading this morning, reproduced by and service ticket thus created by a Control4 employee.

Put a Shelly relay inside the box and use the outlet vendor of your choice.

I stand corrected. I did not realize Kasa made in-wall outlets! I just looked it up and found the KP200. I had never seen that before. 
As I was wrong about any in-wall outlet by them, there may very well be a UK version. 

That's too bad that they don't make a UK version of their US in-wall outlet - we have several and they work very well. Hopefully a version of it gets to the UK soon.

Prompt, reliable, trustworthy, high-value are just a few ways to describe Mitch's service. 

Cleary they did something but it was silent I didn't do anything but try again and it worked 

We've just launched a fix at DriverCentral. v20240405 updates the graphics to something more iOS friendly.
We have tested this on an iPad both Portrait and Horizontal landscape. Please let us know if this has not resolved your issue.
Also, please ensure you Refresh Navigators after the update has been applied.

I can confirm the one unit i personally had impacted is resolved as of this morning!

Latest word from Roku directly to large partners is that they expect to have it fixed by the end of the week.

Thanks for reporting back on the iOS issue everyone.
Looks like it's an oversight on iOS webview supported graphic formats.
We will have an update released in the next few hours and report back. Apologies.

Overview
This driver interfaces with the SolarEdge API to collect and store values for Solar Power generated, Power consumed by the Site, and Grid Power used by or returned to the Grid.
All values are updated every 6 minutes due API limits imposed by SolarEdge.
Features
Clean UI Displays Grid Power, Consumption and Solar Power Displays Daily Totals Programmable variables for: Grid Power Consumption Solar Power Connection Status Exporting/Importing Daily Totals *Note: Consumption and Grid Power is only supported on SolarEdge systems configured with appropriate energy meters.
Limitations
Due to API limitations, data refresh is only updated every 6 minutes. 
Daily Totals are updated at 30 minute intervals. Consumption and Grid Power is only supported on SolarEdge systems configured with energy meters. For systems that only support displaying Solar Power, power readings will only update every 15 minutes. Only tested on single Inverter systems Trial
This driver comes with a 30 day trial, which begins the moment a dealer installs the driver. This should allow sufficient time to test functionality and ensure this driver meets your requirements.
FAQ
Why does the UI say 'Offline' and won't update?
Ensure you check:
Your inverter is still connected to the internet There is no outage on for the SolarEdge API Your Controller has the correct date/time for your time zone. Note: Connection issues can be typically confirmed by opening the mySolarEdge App on your phone, and checking the app still has a connection to your inverter.
Does this driver support batteries?
Not at this time. If you are interested, reach out.
 
Available at DriverCentral:
https://drivercentral.io/platforms/control4-drivers/utility/solaredge/
 
                                           
 

Roku has confirmed this will be fixed by end of week 

Control4 is aware of the problem, it started Friday and as far as they can tell it's a Roku problem...

Apr 1, 15:27 EDT
Identified - Numerous cases have been reported in the last few days of the loss of control of Roku devices through the Control4 system. There have not been any changes to the Roku driver recently and we currently leverage the published APIs by Roku, so we believe this is tied to a recent software update deployed by Roku. A Roku developer forum thread is also pointing to the same issue View the full article

The iOS team hasn't been able to get to testing of Apple Vision Pro yet due to higher priorities, but once they are able to give it a once over I would be happy to give you early access and get your feedback. 

Certainly not for everyone.  I get that.  But if you take the population that is spending six figures on home automation / home theater / computer control of their nightlights, you’re going to find a lot more Vision Pro users in there than in the general population.  Not here to evalgelize— but, as an aside, you might want to get a demo— you might be surprised.  A couple of guys from my C4 dealer team were here a few weeks ago and I gave them demos.  One was “meh” but the other guy was like profoundly impressed.  Anyway, the point of the post is to gently prod/beg C4 to please undo their opt-out so we can use the existing app.  All the while knowing that this is a niche thing.

@eggzlot when you live in a virtual world you still need to control the real world 😆

Any update?  I’m happy to test current iPad app via Test Flight.  Control4 is one of the only things I can’t easily use with Vision Pro, and actual reality is just so tiresome….