Elvis Posted February 16, 2023 Posted February 16, 2023 Although it is probably harder to do than a programming change, I'd like to see the white circle button as a red circle button. Easier to spot the Record button if it's red. Change the custom button tags/captions programmatically. Change the media list format to a more dense format to show more. Quote
Control4Savant Posted February 16, 2023 Posted February 16, 2023 Intercom capabilities would be cool. msgreenf 1 Quote
dinom Posted February 17, 2023 Posted February 17, 2023 It already has a microphone for voice, so intercom could be possible. Quote
Double D Posted February 17, 2023 Posted February 17, 2023 Enable find remote tone. It already beeps when it is docked, so there is a speaker. Custom functions should change when Room is switched. Disable confirmation screen on Room Off. Quote
Cyknight Posted February 17, 2023 Posted February 17, 2023 13 minutes ago, Double D said: Enable find remote tone. It already beeps when it is docked, so there is a speaker. While i don't see much use for this (it should get docked - if you didn't by the time you think to beep it it's likely dead) I would think it fairly simple to implement. 1 hour ago, dinom said: It already has a microphone for voice, so intercom could be possible. That is a lot of conjecture - just because there's a mic and a speaker doesn't mean it's capable of integrating a full two-way audio. 16 minutes ago, Double D said: Custom functions should change when Room is switched. Uhm, you mean the 3 custom buttons? By default they trigger custom 1-3 that were introduced with the SR-260 - so just program on those vs a 'direct' button push. 17 minutes ago, Double D said: Disable confirmation screen on Room Off. At least have an option to turn it on/off Quote
Double D Posted February 17, 2023 Posted February 17, 2023 9 hours ago, Cyknight said: Uhm, you mean the 3 custom buttons? By default they trigger custom 1-3 that were introduced with the SR-260 - so just program on those vs a 'direct' button push. Yes, I believe we all know that. I meant, the labels for these should change as you change to a different room with different functions. Currently, the labels only stay on what was programmed for the original room. IE- my family room fireplace button still shows when I switch to my bedroom, which has no fireplace... Quote
Cyknight Posted February 17, 2023 Posted February 17, 2023 6 hours ago, Double D said: Yes, I believe we all know that. I meant, the labels for these should change as you change to a different room with different functions. Currently, the labels only stay on what was programmed for the original room. IE- my family room fireplace button still shows when I switch to my bedroom, which has no fireplace... Ah so you mean have the LABELS be dynamic and/or programmable Quote
c4toys Posted February 17, 2023 Posted February 17, 2023 5 hours ago, Cyknight said: Ah so you mean have the LABELS be dynamic and/or programmable Thats how I read this, Im thinking custom buttons/labels that would follow the room Quote
Elvis Posted February 22, 2023 Author Posted February 22, 2023 I have to say after having the remote for a bit, the buttons need to be more identifiable by touch. Kind of like the F and J keys on my keyboard. Pressing the DVR button by mistake when fast forwarding or rewinding is extremely frustrating since the play button doesn't do anything while in DVR mode. At least not on Dish. Quote
cnicholson Posted March 2, 2023 Posted March 2, 2023 To state the obvious: add Comfort, Shades and Security, with bonus points available if it can display live security camera video. South Africa C4 user 1 Quote
Time2Jet Posted April 28, 2023 Posted April 28, 2023 Battery life is atrocious. Sent from my iPhone using Tapatalk Quote
Elvis Posted April 28, 2023 Author Posted April 28, 2023 (edited) “Network Error” should not happen when everything else is working fine, including the C4 app, controller, and everything else but the Halo. “Please check your Wi-Fi connection” is not very helpful. How about some specific steps to get the Halo back online. Edited April 28, 2023 by Elvis Add image Quote
msgreenf Posted April 28, 2023 Posted April 28, 2023 There are more enhancements on the way for this error. Right now. The only thing to do is reboot it Quote
Elvis Posted April 29, 2023 Author Posted April 29, 2023 1 hour ago, msgreenf said: There are more enhancements on the way for this error. Right now. The only thing to do is reboot it No luck. Tried multiple times. Along with rebooking all network equipment and controller. Quote
Time2Jet Posted April 29, 2023 Posted April 29, 2023 1 minute ago, Elvis said: No luck. Tried multiple times. Along with rebooking all network equipment and controller. To be clear, you are power-cycling the Halo, correct? The button on the top edge of the Halo. Quote
Elvis Posted April 29, 2023 Author Posted April 29, 2023 19 minutes ago, time2jet said: To be clear, you are power-cycling the Halo, correct? The button on the top edge of the Halo. Yes. First just rebooted it. Then shut it down while rebooting network and controller. Then powered it up. Left it with the net error the rest of the day hoping it would heal itself. It didn’t so turned it off overnight. Still not working. Quote
Time2Jet Posted April 29, 2023 Posted April 29, 2023 28 minutes ago, Elvis said: Yes. First just rebooted it. Then shut it down while rebooting network and controller. Then powered it up. Left it with the net error the rest of the day hoping it would heal itself. It didn’t so turned it off overnight. Still not working. Do you just have the one Halo? Just curious. Quote
DawnGordon Posted April 29, 2023 Posted April 29, 2023 There should be an automatic update to fix this issue within the next week or so. Stay tuned... msgreenf 1 Quote
Elvis Posted May 11, 2023 Author Posted May 11, 2023 (edited) On 4/29/2023 at 7:55 AM, DawnGordon said: There should be an automatic update to fix this issue within the next week or so. Stay tuned... I'm curious how this works when the the remote is offline. Been nearly two weeks without the remote. Edited May 11, 2023 by Elvis Added Screenshot Quote
Time2Jet Posted May 11, 2023 Posted May 11, 2023 1 minute ago, Elvis said: I'm curious how this works when the the remote is offline. Been nearly two weeks without the remote. Grasping. Have you tried rebooting and adding the Halo back via the C4 app? At this point, I’d go to the person you bought the Halo from for support. Quote
Elvis Posted May 11, 2023 Author Posted May 11, 2023 On 4/28/2023 at 9:23 PM, time2jet said: Do you just have the one Halo? Just curious. One Halo. Nothing about the network has changed. About ready to go back to the tried and true SR-260. Quote
Elvis Posted May 11, 2023 Author Posted May 11, 2023 5 minutes ago, time2jet said: Grasping. Have you tried rebooting and adding the Halo back via the C4 app? At this point, I’d go to the person you bought the Halo from for support. How do I get the QR code to come up? It goes right to the network error when I shut it down and restart it. Quote
dinom Posted May 11, 2023 Posted May 11, 2023 Factory reset instead? Don’t remember how to do that, sorry. Quote
Time2Jet Posted May 11, 2023 Posted May 11, 2023 10 minutes ago, Elvis said: I'm curious how this works when the the remote is offline. Been nearly two weeks without the remote. It makes no sense. I don’t think that FW update existed on 04/27. Quote
Elvis Posted May 11, 2023 Author Posted May 11, 2023 1 minute ago, time2jet said: It makes no sense. I don’t think that FW update existed on 04/27. Maybe that is what it SHOULD be -- since composer isn't communicating with it? You'd think it would show the last info, tho. I emailed @chopedogg88 - and I should've contacted him sooner but we've been in/out of town. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.