msgreenf

Fixed.  Removed the Thermostat associated with the Nest service, and then re-added it and did the whole control4 integration again.  Now all 4 thermostats show.

Upgrade to new hardware. The hc250 owes you nothing 

Upgrade to new hardware. The hc250 owes you nothing 

I can help you with remote programming and getting you a Composer HE license. Basically with HE you don't have access to the connections section or the ability to add new drivers. Other than that it's the same application for the most part. 
PM me if interested. 
Thanks 

But any used hardware from Greenfield Solutions and get free labor to add to project. 

Sorry for delayed response. I had this network dropping issue on my fans for years. A year or two ago a firmware update from Modern Form on the fan controller fixed this issue. Not one issue since then.

Disagree. SR is over 50%; probably still 60+

THIS IS A SCHEDULED EVENT May 28, 08:00 - 14:00 EDT
May 24, 14:33 EDT
Scheduled - The OvrC team will be performing planned maintenance to the cloud database between the hours of 8:00 am and 2:00 pm ET on May 28th, 2024.

During this time, we don’t expect there to be any significant interruptions to service but there could be intermittent performance degradation during the maintenance window. Potential impacted features are:

* Log in/Log out including OvrC web and mobile apps, OvrC Connect, Luma/Luma View
* OvrC Public API
* Device communication, config, notifications, updates, etc
* Slow page loading times

This may impact Partner and Customer experience with OvrC Platform's cloud services and mobile applications. This will not impact the local network or customers’ systems as there are no changes to the OvrC agent or devices monitoring the network.

This database upgrade is a continuation of our investment to make OvrC more reliable, resilient and performant for our users.

Thank you,
OvrC Team
View the full article

It already exists...

The roku driver is sending home command when source is changed to OSD. change the roku power on/off setting in the driver

what Mitch said.  also worth noting, is that the only difference is the mid/power box/magnet plate part that comes with it...and worst case you can order just an AC box if you need to adjust the plan.

You can power via POE adapter and use Wifi

Pretty sure that's Tapo, not Kasa. 

Disagree. SR is over 50%; probably still 60+

Disagree. SR is over 50%; probably still 60+

Disagree. SR is over 50%; probably still 60+

Just gotta chime in and say these Modern Forms fans are 100% legit.
 
And a free C4 driver that actually works without another "bridge"!

Need to look at director log at time right before restart and figure out what driver is causing it 

Correct to go straight you have to be on at least 3.3.1. you will need to use the device image updater to update that touch screen first

Need to look at director log at time right before restart and figure out what driver is causing it 

The top of the programming tree. When project loads 

I recommend reaching out to c4 customer advocacy 

Highly recommend working with @chopedogg88

Highly recommend working with @chopedogg88

I would do a Clare system. Hands down best and easiest integration with Control4 in my experience. They have small sensors as well, even recessed wireless sensors which go in the door jamb if you don't want to see them at all. 
PM me if interested, I have them in stock and can also set you up with monthly monitoring for a very reasonable fee.