RAV

Sync scenes - the device is told to store and pay attention that when Director broadcasts Scene 128 for example (which corresponds to Downstairs All) - then Kitchen Island you go to 25% over 2 seconds, Counter 38 etc... This avoids popcorn affect, where lights get the command at varying times, and Director doesn't have to send a command to each lighting device, but sends 1 broadcast command. (I looked it up, each lighting device can be part of 32 scenes, and systems can have 1000 scenes.)

Have you since edited done the 'sync all scenes' action on the lighting page? Any chance the delay lights are in more than, is it 25?? inclusive scenes?

Looking to confirm abilities of Yales Assure 2 locks in Control4. if control4 Yale zigbee card added, local communication, user creation in Control4 UI and programming off of user code. (Must setup lock in Yale app) if WiFi, cloud communication, Yale app manage codes, but control4 can still program off user code. correct?

Do it reliable. Go along the top of the existing cabinets then cut a channel across over the doorway, patch and paint.

We also would not replace a KA with a KC when stairs, or other safety necessary locations, are involved.

And that explains the email from December 2023 about the purging of Inactive accounts. https://www.snapone.com/privacy/inactive-customer-account-policy Inactive accounts = short answer, hasn't called home in 2 years, details follow the link.

I just called tech support for clarification. An old account upgrading to a Core DOES NOT have to pay for Connect and may fully update to the latest OS!! Connect ONLY triggers at creation of a new account, and does so for ALL new accounts regardless of processor or OS! Home sold systems need to either have the previous owner do a change of email to the new owners, or new owners will HAVE to pay Connect for a new account, even for an HC running 2.10.6. In theory there is a resale value to dead accounts.

Primarily Bug Fixes and Connect Requirement. https://www.control4.com/docs/product/control4-software/dealer-release-notes/english/latest//control4-software-release-notes-rev-as.pdf

You could bypass the fan output of the Control4 Fan Speed Controller essentially turning it into a KC120 and run the hot direct to the new fan. Then reprogram the buttons as you'd like. But I don't think you'll be able to 'add' an up/down to the fan controller driver in composer. But no the KCB is not a choice as it's 48v power and RS485 for panelized lighting. KC120 would be the choice.

Much of it comes down to the cost of entry, exclusives and job security. If you have the related Certification, than you're going to spec their hardware, in part to lock out those that don't have Certification. It's a Union thing.

How often do you loose power? For how long? You may want to invest in a UPS for your processor and matrix (and other related non amplifier components)

Trying to make a pizza from a picture you saw. It’s just bread, cheese and tomatoe sauce.

Correct on what I was thinking. Whether it's one driver with subheadings or using multiple instances of the driver, would depend on what's possible within the driver architecture itself. It was thinking multiple instances to keep from long scrolls to find the info you want.

and there's also Presence Sensors rather than just motion: https://chowmain.software/drivers/control4-athom-human-presence-sensor

I understand your point. I'm just saying, make the timer longer and you'll likely have a better experience without adding more programming and complications.

Make the timer much longer. You've added a pain point that's not resulting in significant savings. If you're using LED the cost savings between a 5 minute occupancy off and a 30 minute is going to be less than a latte a year. Average kitchen LED lighting, it's about $6 a month if left on 24 hours a day! Which is about a penny per hour.

But I can create a user variable to match a driver variable. So was wondering if the driver allows multiple lists in one system for displaying that information to end user in one place, not so much manipulating the variable. Show all lock status, HVAC values, alarm window contacts etc.

Then there should be a Garage Door driver in your project which you'll program against, it's not a variable. You need a timer - for however long you want the delay to be. GarageTimer Then in programming tab When Garage Door opens, reset timer GarageTimer When Garage Door closes, stop timer GarageTimer When GarageTimer expires - close door

Do you have a garage door icon that's currently reflecting the state?

I display list per project? For example. Cool Setpoint list - shows all the tstat cool points in the house Heat Setpoint list - shows all the tstat heat points Current Temperature list - etc

Fixed

Nice !

https://status.snapone.com/

Probably not you. Post in the dealer forum about slow loading this morning, reproduced by and service ticket thus created by a Control4 employee.

Remote buttons get their function from the source device driver, ie cable box. To change what a button does to a source you have to edit that driver, most drivers are not easy to edit. You can program at the room level additional commands to any remote button, which are based on the sr series remotes nomenclature. If no source device uses the page up down, you’re good. If any do, you get both the device and the room level commands. Adding if source is xyz type commands at the room level for a button you can send those additional commands for only devices that don’t have device commands. (You can not prohibit a device level command through programming, only through editing the device driver)