South Africa C4 user

I use a 2 second hold instead of a triple tap.  Same principle.
And I track whether we are at home.  If we are not in residence then the fireplace button does nothing…

I personally add a push notice for when director reboots so I can track when it reboots - could do that to see if that’s why the sessions are disappearing 

Sync scenes - the device is told to store and pay attention that when Director broadcasts Scene 128 for example (which corresponds to Downstairs All) - then Kitchen Island you go to 25% over 2 seconds, Counter 38 etc...

This avoids popcorn affect, where lights get the command at varying times, and Director doesn't have to send a command to each lighting device, but sends 1 broadcast command.
(I looked it up, each lighting device can be part of 32 scenes, and systems can have 1000 scenes.)

Have you since edited done the 'sync all scenes' action on the lighting page?
Any chance the delay lights are in more than, is it 25?? inclusive scenes?

There are 3 or 4 IntelliTouch drivers out there. I think I have tried all of them.
The only one that I would recommend is the bNet Solutions driver.  It is (in my view) the best pool driver out there and has better (more complete)  integration than any other pool driver I have seen and I have seen many Pentair and other pools connected to Control4.
It is also the only IntelliTouch driver that I have seen which 100% reliably gives 2 way control to the various Pentair circuits etc.

The biggest change which might affecs a small number of users is that some drivers like the old ping driver and reboot driver are likely broken. This is a good thing because when drivers like ping ran, they blocked every driver on the controller from running for a few seconds (so, power on commands would be delayed, etc)
You'll want to ensure all your drivers are up to date if you run into issues

And a fix for some Spotify issues

Primarily Bug Fixes and Connect Requirement.

https://www.control4.com/docs/product/control4-software/dealer-release-notes/english/latest//control4-software-release-notes-rev-as.pdf

We are working on this as another driver, stay tuned.
Due to the complexities of setting up each variable we are also implementing an admin tab within the UI to facilitate a faster setup.

I must say I like the idea of multiple instances where you can choose which variables to display in a given instance…

I can say that I assigned all of mine to separate rooms in HomeKit.  I thought it was just me being OCD (especially as it was a pain determining which is which) but maybe doing that helped me 🤷‍♂️ 

Hello!
I've just released v20 of this driver, it adds support for OS 3.4.2 and also adds a property to increase/decrease the volume of Google Speech announcements
There's also a sale on the driver price for the next couple of weeks

Yeah.we should look at that again. Thanks. 

The rename driver is a great driver.  Unfortunately doesn’t work via programming for large projects… @msgreenf - would be great if that could be changed 😃

Another option is to insert variables into the email (eg a string with the name of the window).  I do this a lot.

The control4 one...

The Core Lite is limited to a single room. It has HDMI out and three IR/one serial port(s), and an internal Zigbee antenna. So, yes, it can function like a Core 1 for TVs, but at a less expensive price when bundled with a remote.

Thanks for the feedback, and glad it will help some people out!
We've heard some stories of people with lots of 'experience buttons' just to toggle Variables on/off!
We are also releasing an update to this very soon (hopefully tomorrow), that should help you setup your projects much faster; the show/hide all Actions will be modified to allow you to show/hide all variables based on their 'Type'. For example, you could 'show all bool' then manually hide those you don't want visible.

OVERVIEW
This driver is used to view and make changes to Variables, created in the Control4 Variables agent, from a single UI.
 
Supported Variable Types
Currently the following variable types are supported:
String Number Float Bool Device Color  
Features
Customizable names for each variable. These names are specific for this driver only. Only show the variables you want to see in the UI. Toggle all of your Boolean values from a single UI. No more experience buttons for each one! Optional pin code protection from the UI. Set variables as read only, if you don't want people adjusting values.   Limitations
There are no known limitations.   Support
Contact information:
This driver was developed by Whistle Projects. Please send any enquiries to whistleprojects.control4@gmail.com
 
Available at DriverCentral:
https://drivercentral.io/platforms/control4-drivers/utility/agent-variables/
 
         

I have one keypad where I occasionally got a static shock from until I changed the carpet (the change in carpet was unrelated but removed the issue).  This did reboot the keypad.  The shock was scarcely noticeable just a minor spark / static sound and the merest of tingles.

Prompt, reliable, trustworthy, high-value are just a few ways to describe Mitch's service. 

Actually, with the Advanced Lighting Timer, you can do this with one Light On Level specification: D+45=0%,N-45=50%,N+60=95%
When using D/N ((Daytime and Nighttime) in the specification, view this as a continuous circular specification.  From 45 minutes after sunrise (D+45), the light will not come on (0%).  From 45 minutes before sunset (N-45) to 60 minutes after sunset (N+60), the light will come on at 50% (or whatever you want).  From 60 minutes after sunset, the light will come on at 95% until the next time specified in a circular way, which is D+45 (45 minutes after sunrise).  Using 95% instead of 100% is barely noticeable, but it allows the user to override the timer by turning the light ON manually, which is usually 100%.
Paul

Since you worked for a dealer, you know the rules.  You need an email that’s associated with a dealer account.
Find another dealer to work for??

Thanks for reporting back on the iOS issue everyone.
Looks like it's an oversight on iOS webview supported graphic formats.
We will have an update released in the next few hours and report back. Apologies.

What driver are you using?  I have Cx and Bx models and they all work perfectly using the Annex4 driver.