msgreenf

there is a c4z version of the driver i believe, you want to use that version...

Glad I found this forum.... all this info was helpful thanks
 

This is fixed, Control4 took no action, but SiriusXM had an issue on their end...

Neil is awesome!! He did some spur of the moment programming for me and did it without hesitation. I appreciate it, Neil.

Pretty sure that’s correct. You matrix is what will control if the room is playing sound or not, but the trigger will Light up the whole amp. 

Solved - thank you all-

ended up going with that IP driver and the arrisxg1v4 box- driver works great!

Usually when APIs change your notify partners I'm advance and give them deadlines on when they have to meet the new API. That doesn't seem to be the case here 

Control4 is aware of this

Usually when APIs change your notify partners I'm advance and give them deadlines on when they have to meet the new API. That doesn't seem to be the case here 

Use the LED wizard 

Port forwarding potentially opens up a whole other can of worms.  Not recommended. 

Hey Everyone,
thank you for your trust in me to help you with your systems over the years!  I have met and helped many great people and enjoy texting with you all.  I have never raised my rates since I started and I contemplated it last year and held off, but now I will need to raise my hourly rate starting 1/1/2024.  
But good news, you can pre-pay for hours at the lower rate if you know you have a project coming up (change will not impact inflight projects).
Thanks again and happy holidays everyone!
Mitch

I second that - I’ve worked with Mitch for three years now and he has helped support our systems at two properties. Mitch is incredibly responsive, knowledgeable, experienced, and very reasonable. He’s a pro and we’d be lost without him!

Yes. But requires on-prem hardware of some sort while the likes of nextdns do the same thing but without the hassle of maintaining hardware/software. Of course, some still argue the value of that setup

I am sure I don't even need to say it, but Mitch is top notch Control4 programmer. You wont go wrong hiring him.
 

Hey Everyone,
thank you for your trust in me to help you with your systems over the years!  I have met and helped many great people and enjoy texting with you all.  I have never raised my rates since I started and I contemplated it last year and held off, but now I will need to raise my hourly rate starting 1/1/2024.  
But good news, you can pre-pay for hours at the lower rate if you know you have a project coming up (change will not impact inflight projects).
Thanks again and happy holidays everyone!
Mitch

my issue with using one shortcut driver is i prefer one device over another in my setup. If i want to use youtube my shield tv has a better interface. but netflix hdr and atmos only works on my roku, shield is getting a bit long in the tooth. So you would need one for each to properly select the one you want or need to do some programming. The driver will always try to use a device that is not in use or use the device that got the first selection if there are no devices left, or use a device that is using the same service. So in a larger distribution system it may require more. 

The days of needing pihole are gone. Just use a filtering dns like adguard or even better (more customizable) nextdns. Setup an account with nextdns (free!) and you can add blocking lists and more. Very good, quality, service. Then on your router / dhcp server, push out the nextdns dns servers and you are set. On your c4 hardware, use 1.1.1.1 or 8.8.8.8 for dns and you bypass the restrictions. Done. 

Told him the same thing ... 

Alas, not for Android users (only iOS).  Josh seems very iOS-centric with their development.  They upgraded their Android app (after being "in beta" for years) in September, but it still did not have parity with their iOS app when released.

No

I sort of disagree. I would want to control all thermostats from any room in the house.
That said, the easy way to fix it in this case is to clear ALL comfort from any one room (unless there's 'other' things you want everywhere then leave those) and then apply to all, then do each room with what you want. That's how a dealer SHOULD setup things to begin with. While 'apply to...' overwriting previous settings is annoying, it's still a step up from not having the ability to 'apply to..' at all.
 
More annoying to ME is that the first t-stat dropped into the system auto binds to all room (which is fine as such) but adding a different t-stat to another room doesn't at least overwrite the default tstat for that room (ie the nav displays that t-stat's value on the main page)

Hey Everyone,
thank you for your trust in me to help you with your systems over the years!  I have met and helped many great people and enjoy texting with you all.  I have never raised my rates since I started and I contemplated it last year and held off, but now I will need to raise my hourly rate starting 1/1/2024.  
But good news, you can pre-pay for hours at the lower rate if you know you have a project coming up (change will not impact inflight projects).
Thanks again and happy holidays everyone!
Mitch

Hey Everyone,
thank you for your trust in me to help you with your systems over the years!  I have met and helped many great people and enjoy texting with you all.  I have never raised my rates since I started and I contemplated it last year and held off, but now I will need to raise my hourly rate starting 1/1/2024.  
But good news, you can pre-pay for hours at the lower rate if you know you have a project coming up (change will not impact inflight projects).
Thanks again and happy holidays everyone!
Mitch

Happy holidays Mitch. Your work is incredible! It’s great to be part of this community and thanks to you and many other experts who really make it a great experience for all of us who love Control4!

Happy holidays to everyone in the group.


Sent from my iPhone using Tapatalk