Leighm0

How does one acquire the 5.X drivers for LG TVs... I looked in our login and it says our projects are running 4.15.375 and that they are "Up to date", also I cannot see a download on your drivers page for a 5.X driver version?

I have now added the ability to turn Discovery to Manual in latest version of my driver - so now you can target a particular Envoy IP address for your multiple Envoy setup... you will need to add multiple instances of the driver in your project if you wish to track them all.

I will look to add this option into a future release, but for now if you just need to know if the system is On or Off Grid, you could use this driver: https://github.com/warmenhoven/envoy-c4z

oh you have 4 Enphase Gateways! lol never seen such a big system.. I only built the driver for 1 Enphase gateway.. I'll have to look at adding in an option to select which envoy from a list of discovered ones, this will likely fix the issue as it is probably confusing the driver with the multiple devices being discovered.
I'm currently on vacation so won't be able to look at it for a few weeks.
 
As for the Error on line 492, that looks to be a quick fix, I will issue a new version shortly to fix that.
 
*UPDATE*
I just uploaded Version 17, please see if it helps with the Error Line 492.  It will not help with your multiple Envoy gateways, I will work on that in the next few weeks.

Sorry, I would need more information about your error, mines been running nonstop without errors since November.  What Enphase firmware are you running? What kind of network do you have, the driver uses mDNS to locate the enphase gateway IP, and if you are on v7 or newer firmware it requires your Enphase login credentials to get tokens for accessing the data on the gateway.

I believe it was mentioned that CORE controllers will get it first, followed by EA controllers.

My suggestion is to use v4.8 for the USB drivers attached, the reason is because sometimes these old T3 tablets do not get picked up with the newer Rockchip USB drivers properly and the Imaging fails to run successfully (just from my experience).
However you can also obtain v5.1.1 from here if you wish to give it a go: https://androidmtk.com/download-rockchip-driver-assistant
I have attached both files that I personally use.
RKDevTool_Release_v2.79.zip Rockchip_DriverAssitant_v4.8.zip

Use the "Custom Buttons" Agent to create custom buttons on the Halo Touch remote.. thats the only custom buttons that can be created on the Halo Touch I believe.
 

This can be done by using the "Screen Saver Dismiss" command in programming... it will actually Wake up the display on a T3 (in screensaver, or even if the screen has been pressed off)

This can be done by using the "Screen Saver Dismiss" command in programming... it will actually Wake up the display on a T3 (in screensaver, or even if the screen has been pressed off)

I don't think it will ever support T4, the code behind this is not available on T4's (Control4 removed it I believe, as it doesn't respond to the same code).. I tested out with a few T4 displays and could not get it to do the same action, but I will look into it again.

The Neeo is no longer listed on the C4 dealer portal (it was removed when they couldn't fulfil back-orders in a timely manner), I doubt it'll return... we were told the particular brand chipset used was very hard to get due to shortages.  
 
Which if you think about it, its not too bad - considering the Halo should be compared to a SR260RSK (price-wise) - since it comes with a built-in rechargeable battery and dock/recharge station.. so for an extra $80, you get quite a bit of an upgrade, full color display, etc... 
 
 

they reconfigured the mosquitto service for TLS certificate authentication (the new z-wave drivers use this method), that's why Berto drivers can no longer connect to it..

This notice is on our dealer portal (see image below), along with that End of Sale for the EA5 that was mentioned (cannot be ordered at all anymore, no stock etc).  I assume once stock is done, they will be marked end of sale. And Control4/Snap will only keep enough inventory for the 2 year RMA period..

I believe you will need a new CORE Series (CORE 3 or 5) controller with their built-in Z-Wave S2 chip.  The older Z-Wave module/dongle that was available for the EA series will not be adequate.

I believe you will need a new CORE Series (CORE 3 or 5) controller with their built-in Z-Wave S2 chip.  The older Z-Wave module/dongle that was available for the EA series will not be adequate.

The Neeo is no longer listed on the C4 dealer portal (it was removed when they couldn't fulfil back-orders in a timely manner), I doubt it'll return... we were told the particular brand chipset used was very hard to get due to shortages.  
 
Which if you think about it, its not too bad - considering the Halo should be compared to a SR260RSK (price-wise) - since it comes with a built-in rechargeable battery and dock/recharge station.. so for an extra $80, you get quite a bit of an upgrade, full color display, etc... 
 
 

The Neeo is no longer listed on the C4 dealer portal (it was removed when they couldn't fulfil back-orders in a timely manner), I doubt it'll return... we were told the particular brand chipset used was very hard to get due to shortages.  
 
Which if you think about it, its not too bad - considering the Halo should be compared to a SR260RSK (price-wise) - since it comes with a built-in rechargeable battery and dock/recharge station.. so for an extra $80, you get quite a bit of an upgrade, full color display, etc... 
 
 

The Neeo is no longer listed on the C4 dealer portal (it was removed when they couldn't fulfil back-orders in a timely manner), I doubt it'll return... we were told the particular brand chipset used was very hard to get due to shortages.  
 
Which if you think about it, its not too bad - considering the Halo should be compared to a SR260RSK (price-wise) - since it comes with a built-in rechargeable battery and dock/recharge station.. so for an extra $80, you get quite a bit of an upgrade, full color display, etc... 
 
 

It's public on YouTube here https://www.youtube.com/watch?v=_vTav930ARs

It's public on YouTube here https://www.youtube.com/watch?v=_vTav930ARs

there was, but it says its sold out now if you didnt register for a ticket when it was announced... it is however going to be available on the Snap One Portal after the event.. not sure if that will be publicly available to watch though.
UPDATE: It's a public live event in the Snap One YouTube here - https://www.youtube.com/watch?v=_vTav930ARs
 

Our Tesla driver update has been in beta testing for the last month and no issues have been reported. It's now available publicly again and you can find it here https://www.intrinsicdev.com/downloads/tesla-vehicle-driver-for-control4/
It's also available in all existing Intrinsic Dev Control4 Driver Packs and dealer Showroom Packs, simply download the latest version of the driver from the website (220702) and our license server will auto-detect the license for you.
If you've used the driver before please ensure you follow the Integration Note to ensure correct installation as there's a few additional steps required.
Huge apologies for the delay on this one... we're putting steps in place to mitigate this in future.

Normal behaviour, the driver hasn't got Passthrough mode like Roku..